WEB SITE TOOLS

WOODCO USA provides Web Site Tools for identification, estimating, and reference only. Do not use this information for manufacturing or inspection.  Users of these tools should not use them as a substitute for professional engineering advice.  Anyone making use of the information presented does so at his own risk and assumes any and all liability resulting from such use.

For quick access, open drop down box and press alphabetical key.

Find it Instantly                                               A Adapter Ring Gaskets Adapter Flange / Spool Orientation Adapter Spool Common Centerlines Altering Mechanical Properties American Made ANSI Flanges ANSI x API Flanges API x ANSI Flanges API 6A Flange Bolt Length API 6A Flange Dimensions API 6A Flange Weights API 6A Flanges API 6AB Flanges API 16A Clamp Dimensions API 16A Clamp Hub Dimensions API 16A Clamp Installation Instructions API 16A Clamps API 16A Hub Dimensions API 17D Blind Flanges Caution API 17D Flange Bolt Length API 17D Flange Bolt Tension API 17D Flange Dimensions API 17D Flange Weights API 17D Full Bore Weld Necks API 17D Studded Connections API 17D SS Flanges API 17D SV Flanges API 17D Swivel Flanges API Bolt Tension API Flange Hardness Requirements API Flange History API Flange Minimum Hardness API Flange Slide Rule API Gate Valve Dimensions API Hammer Unions API Line Pipe Properties API Material Properties API PSL Application API Ring Gasket Application API Ring Gasket Configuration API Ring Gasket Hardness API Ring Gasket Marking API Ring Gasket Material API Top Connectors API Top Connector Dimensions ASA Flanges                                                B Bell Nipple Flange Bell Nipple Assembly Bell Nipple Pipe Size Body and Bonnet Material Bolt Circle Centerline Illustrations Bolt Hole Arrangement Bolt Lengths Bolts, Combination Bolt Tension Bolt Tightening Sequence Bolt Torque Chart Bottom Hole Test Adapter Bottom Hole Test Adapter Dimensions Brinell Hardness Chart BX Ring Gasket BX Ring Groove                                                C Celsius Converter Centerline, Common Clamp and Hub History Clamp and Hub Reference Chart Clamp Bolt Tightening Sequence Clamp Dimensions Clamp Fits What Hub Clamp Hub Connectors Clamp Hub Dimensions Clamp Hub Repair Clamp Hub Ring Groove Repair Clamp Inspection Clamp Installation Instructions Clamp Test Pressure Clamps, API 16A Clamps, Cast Steel Clamps, Four Bolt Type Clamps, Swing Bolt Clamps, Through Bolt Type Combination Bolts Combination Ring Gaskets Companion Flanges Country of Origin Cross, Flanged, Dimensions Cross, Studded, Dimensions Crossover Connections                                                D Definitions Deformed Ring Gaskets Disassembly of Made-Up Flange Diverter Flange Domestic Made Double Drilled Bolt Circle Double Drilled Flange Caution Double Drilled Flange Ring Groove Double Drilled Flanges Double Studded Adapter Common Centerlines Double Studded Adapter Thickness Drift Size / Test Dual Flange                                                E Elbow, Flanged, Dimensions Elbow, Studded, Dimensions End and Outlet Connection Material Equipment Marking Equipment Stack Assembly                                                F Fahrenheit Converter Female Union Half Field Qualification Testing Flange, Bell Nipple Flange Bolt Length Flange Bolt Tightening Sequence Flange Break-Out Flange by Circumference Flange by Diameter Flange Dimensions Flange Disassembly Flange, Double Drilled Flange Drift Size Flange, Dual Flange Gasket and Bolt Chart Flange History Flange, Instrument Flange Make-up Flange Metric Bores Flange, Segmented Flange by "Series" Chart Flange by "Series" Dimensions Flange Slide Rule Flange Stand-off Flange, Target Flange Weights, Surface Flange Weights, Subsea Flange Weld Neck Dimensions Flanged Cross Dimensions Flanged Elbow Dimensions Flanged Gate Valve Dimensions Flanged Tee Dimensions Flanged Top Connector Flanges, Lead Filled Fraction - Decimal - Millimeter Conversion Chart Ft-Lbs to Joules Converter                                                G Gate Valve Dimensions Glossary                                                H H2S Hardness Requirements H2S Service Equipment Hammer Union Standardization HBW Explained Hardness Number Conversion Chart Hub and Clamp History Hub and Clamp Reference Chart Hub Cross/Tee/Elbow Dimensions Hub Dimensions Hub Ring Groove Repair Hub Top Connector Hub Uses What Clamp                                                I Inch to Metric Converter Inch to Millimeter Conversion Chart Instrument Flange Instrument Flange, Double Studded Instrument Flange, Drilled Through                                                J Joules to Ft-Lbs Converter                                                K Kilogram to Pound Converter                                                L Line Pipe Properties Line Pipe Schedules and Dimensions Low Stress Marking Lead Filled Flanges                                                M Made in U.S.A. Make-up, Flange Male Union Half Marking Material Mechanical Properties Metric to Inch Converter Microstructure MM to Inch Conversion Chart MPa to Psi Converter MSS-SP-44 Flanges                                                N NACE Maximum Hardness                                                O Oval bottom ring groove                                                P Pipe Schedules and Dimensions Pound to Kilogram Converter Port, Test PR 1 and PR 2 Psi to MPa Converter PSL 1, 2, 3, and 4 Explained PSL Application                                                R R Ring Gasket R Ring Groove Reliability RF, Raised Face Ring Gasket Chart Ring Gasket, Adapter Ring Gasket Application Ring Gasket, Combination Ring Gasket Condition Ring Gasket Configuration Ring Gasket Deformation Ring Gasket Hardness Ring Gasket Inspection Ring Gasket Marking Ring Gasket Material Ring Gasket Numbers Ring Gasket Selection Ring Groove Condition Ring Groove, Oval Bottom Ring Joint Sealing Explained Rockwell Hardness Chart RTJ, Ring Type Joint RX Ring Gasket                                                S Segmented Flange Series Flanges SBX Ring Gasket SRX Ring Gasket SPWD, Spiral Wound Gasket SS Flanges, API 17D Standardized Union Designation Steels for Well Head Equipment Steel Microstructure Stud and Nut Engagement Stud Bolt Length Studded Cross Dimensions Studded Elbow Dimensions Studded Tee Dimensions Subsea Bolt Tension Subsea Flange Weights Surface Flange Weights SV Flanges, API 17D Swing Bolt Clamps Swivel Flanges, API 17D                                                T Tap End Stud Lengths Target Flange, After Well Event Target Flange Caution Target Flange With Fluid Cushion Target Flanges Target Flanges Assembled Technical Terms Tee, Flanged, Dimensions Tee, Studded, Dimensions Temperature Converter Test Port Test Pressure Table Test Pressure Caution Test Pressure on BOP Rams Test Pressure on Choke Needles Test Pressure on Valve Gates Test Rack Tips Threaded Connection Working Pressure Top Connector Dimensions Top Connector, Flange Top Connector, Hub Top Connector Lift Threads Top Connector Sizes Top Connectors Explained Torque Sequence Transition Piece, Weld Neck Tree Caps                                                U Union Identification Tool Unions, Male and Female Halves Union Standardization USA, Made In                                                V Valve Dimensions                                                W Weld Neck Flange Attachment Weld Neck Flange Dimensions Weld Neck Flanges Explained Weld Neck Flange, Full Bore Weld Neck Flange Material Weld Neck Flange, Restricted Bore Weld Neck Flange, Transition Piece Working Pressure, Threaded Connection

Or search this site Loading Search results open in a new window.

QUESTIONS & ANSWERS

WEB SITE TOOLS