links give access to illustrations and/or additional information.
To return to this page use your browser back button.
To ask a new question or comment on
this page, click here.
Subject: Diverter Flange
I require the dimensions for a (non API?) flange and
cannot find any information. Could you please advise all flange
dimensions, ring dimensions and pressure rating for a 29 1/2" R-95
flange/ring joint, which we need for a diverter application?
Since you say the flange you want information on
connects to a nominal 29-1/2" Diverter, and has an R-95 groove, we
assume the Diverter has a 500 psi working pressure. All manufacturers we
know of that make Diverters of this size and pressure use 30" 300 MSS
RTJ flanges for their connections. You will find information about this
flange on the WOODCO USA Flange Slide Rule at:
In case the matter ever comes up, 30" 1,000 psi
Diverters use 30" 600 MSS RTJ flanges, also shown on our Flange Slide
At WOODCO USA the same knowledge and effort
we put into this web site goes into every product we sell. If this Web Site
helps you, or persons for whom you have responsibility, please reward WOODCO USA
with your business.
Information above, and in other
parts of this Web Site, may help persons who really seek to know. If you
have a question, or need a quote, please use our
Contact Us link and give us a
chance to help, and send WOODCO USA some business.
provides Web Site Tools for identification, estimating, and reference only. Do
not use this information for manufacturing or inspection. Users of these tools
should not use them as a substitute for professional engineering advice.
Anyone making use of the information presented does so at his own risk and
assumes any and all liability resulting from such use.
FOR FURTHER INFORMATION, OR TO LEARN MORE ABOUT WOODCO
USA PRODUCTS AND SERVICES,
P.O. Box 1261
Houston, Texas 77251-1261
USA and Canada: 1-800-496-6326