BRAND
 
  
 

     
See Catalog Get a Quote

ABOUT FLANGES

On this page you will find API Spec 6A and API Spec 17D Flange information, dimensions, and a method of Flange identification. Included, you will find a chart comparing old API Series Flanges with many ANSI Flanges and current API Flanges. You can easily obtain Flange bolt sizes, bolt torque, and ring gasket numbers.

Provided links give access to illustrations and/or additional information.
To return to this page use your browser back button.

FLANGE SLIDE RULE PROGRAM

This "WEB SITE TOOL" gives you six useful ways to view Flange dimensional information. Scroll down to select the way that works best for you.

INDEX


1. If you want to view the dimensions on a specific Flange, select this Flange by size and pressure designation.
IDENTIFIED FLANGES

FOR API 6A FLANGE WELD NECK
DIMENSIONS, CLICK HERE.


FOR API 6A SEGMENTED FLANGE
DIMENSIONS, CLICK HERE.


FOR API 6A FLANGE WEIGHT CHART,
CLICK HERE


FOR API 17D SS FLANGE WELD NECK DIMENSIONS, CLICK HERE.


FOR API 17D SV FLANGE WELD NECK DIMENSIONS, CLICK HERE.


FOR API 17D FLANGE WEIGHT CHART,
CLICK HERE.
CLICK TO SELECT FLANGE BY FULL BORE SIZE AND PRESSURE RATING.
* OBSOLETE, DISCONTINUED OR WITHDRAWN FLANGE
 
TO VIEW OR PRINT A FLANGE REFERENCE CHART FOR CURRENT STANDARD FLANGES AS AN ADOBE  PDF DOCUMENT, CLICK HERE.
 
    
 

IF YOU NEED THE ADOBE ACROBAT READER,CLICK HERE

 

2. To identify a Flange by comparing the dimensions to a standard, select the Flange by the measured outside diameter (O.D.) or the measured circumference (Cir.). The measurements will vary some due to tolerance. Because different flanges may have the same measured outside diameter or circumference, this method may require that you compare your Flange measurements  to one or more "Previous" or " Next" for positive identification.  Click Here to View a Flange Identification Worksheet.

UNIDENTIFIED FLANGES

 

CLICK TO SELECT FLANGE BY OUTSIDE DIAMETER (O.D.) or CIRCUMFERENCE (Cir.)
* OBSOLETE, DISCONTINUED OR WITHDRAWN FLANGE
3. To view any API Spec 6A Flange originally identified by old API size and series designation, and to determine which ANSI Flange it will directly connect with, select it here.
SERIES FLANGES
Click to select Flange by size and Series.

To view the full chart on the internet or print a cross reference chart of these flanges as an Adobe PDF document, Click Here.

 

IF YOU NEED THE ADOBE ACROBAT READER CLICK HERE


4. To view the Stand-Off dimensions between Made-Up Flanges* that seal using R and RX Gaskets, Click Here.
  * FLANGES USING BX RING GASKETS DO NOT HAVE NOMINAL STAND-OFF
5. To view the inch and metric full bore dimensions for any current API nominal Flange bore, select it here.
  Inch MM

Note: Rounded dimensions shown.

6. To view the drift diameters (Inch/ MM) for full bore Flanged Christmas Tree and Blowout Preventer equipment, Click Here.

At WOODCO USA the same knowledge and effort we put into this web site goes into every product we sell. If this Web Site helps you, or persons for whom you have responsibility, please reward WOODCO USA with your business.


Email this page to a friend or colleague.
  
  Your Email Address:
  Your Colleague's Email: