Click for Home Page
CLICK HERE TO LEARN MORE ABOUT:
CLICK HERE TO GO TO:

Learn how to identify a flange or get dimensions.

 

 

 

Torque values shown applicable to "black" or "plated" bolts and nuts used with integral flanges.  For fluoropolymer coated bolts and nuts click here.

Flanges with "R" ring grooves can connect and seal with either R or RX ring gaskets. RX gaskets increase the stand-off between flanges, and studs shown in the illustration above have sufficient length to accommodate RX gaskets in these connections. In some cases equipment design may restrict clearance and shorter studs will increase convenience. For information on these shorter stud lengths, see AWHEM document TR9501 at www.awhem.org/docs.htm.  To compare the difference in stand-off when using R or RX gaskets click here.

CAUTION: The difference in stand-off between R and RX gaskets can cause alignment problems on close coupled manifolding or pressure controlling loops. Assembly designers specify component dimensions which allow for the difference in stand-off between flanges when choosing either R or RX gaskets. When operators perform maintenance that involves disassembly, trouble free reassembly requires using gaskets the same as the gaskets originally chosen.

TO VIEW EXTENDED CAUTIONS ABOUT THIS FLANGE CLICK HERE.

Information above, and in other parts of this Web Site, may help persons who really seek to know. If you have a question, and you think WOODCO USA may have the capacity to answer it, please use our Contact Us link and give us a chance to help.

WOODCO USA provides Web Site Tools for identification, estimating, and reference only. Do not use this information for manufacturing or inspection.  Users of these tools should not use them as a substitute for professional engineering advice.  Anyone making use of the information presented does so at his own risk and assumes any and all liability resulting from such use.

FOR FURTHER INFORMATION, OR TO LEARN MORE ABOUT WOODCO USA PRODUCTS AND SERVICES,

CONTACT:

WOODCO USA
P.O. Box 1261
Houston, Texas 77251-1261
Phone: 713-672-9491
USA and Canada: 1-800-496-6326
Fax:  713-672-8768
www.woodcousa.com
 Click here to ask a question or get other information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
   

2-1/16" 2M FLANGE

CAUTION: 2-1/16" 2M flange will mate with discontinued API 2" 400 SERIES flanges as well as 2" 300, 2" 400 and 2" 600 CLASS RTJ ANSI B 16.5 flanges. The resulting connection to API 2" 400 SERIES flanges has a working pressure of 960 PSI. Connection to ANSI B 16.5 flanges produce working pressures as follows:

2" 300 CLASS = 720 PSI.
2" 400 CLASS = 960 PSI.
2" 600 CLASS = 1440 PSI.

 

Information above, and in other parts of this Web Site, may help persons who really seek to know. If you have a question, and you think WOODCO USA may have the capacity to answer it, please use our Contact Us link and give us a chance to help.

WOODCO USA provides Web Site Tools for identification, estimating, and reference only. Do not use this information for manufacturing or inspection.  Users of these tools should not use them as a substitute for professional engineering advice.  Anyone making use of the information presented does so at his own risk and assumes any and all liability resulting from such use.

FOR FURTHER INFORMATION, OR TO LEARN MORE ABOUT WOODCO USA PRODUCTS AND SERVICES,

CONTACT:

WOODCO USA
P.O. Box 1261
Houston, Texas 77251-1261
Phone: 713-672-9491
USA and Canada: 1-800-496-6326
Fax:  713-672-8768
www.woodcousa.com
 Click here to ask a question or get other information.