|
ABOUT HUBS AND CLAMPS
Revised: 12/28/2007 Provided links give access to illustrations and/or additional information. To return to this page use your browser back button. What Hub Does This Ring Gasket
Fit? (For Flange ring gaskets, click here). For SBX ring gaskets see note at bottom of this document). Note: Ring gaskets marked SRX and SBX have identical measurements to RX and BX ring gaskets with the the same number designation, and they will fit the same corresponding connectors. The "S" indicates these gaskets have vent holes to allow reliable connector make-up underwater (subsea). API Spec 17D requires that manufacturers use only corrosion resistant alloy as the material for these gaskets.
|
||||
|
Information above, and in other
parts of this Web Site, may help persons who really seek to know. If you
have a question, and you think WOODCO USA may have the capacity to answer
it, please use our
Contact Us link and give us a
chance to help. WOODCO USA provides Web Site Tools for identification, estimating, and reference only. Do not use this information for manufacturing or inspection. Users of these tools should not use them as a substitute for professional engineering advice. Anyone making use of the information presented does so at his own risk and assumes any and all liability resulting from such use. FOR FURTHER INFORMATION, OR TO LEARN MORE ABOUT WOODCO USA PRODUCTS AND SERVICES, CONTACT: WOODCO USA |
