Catalog for WOODCO USA Pressure Control Equipment

Page 9 

WOODCO USA presents this catalog to gain your attention and secure your business

Phone: 713-672-9491

      Figure 2.3 B   Photo

             FLANGE X STUDDED ADAPTER SPOOL

        (A) NOMINAL FLANGE CONNECTION

      (B) NOMINAL STUDDED CONNECTION

OAL =   MINIMUM LENGTH TO PROVIDE ADEQUATE WORKING CLEARANCE. SPECIFY ADDITIONAL LENGTH IF REQUIRED.



           Figure 2.3 C   Photo

              FLANGE X HUB ADAPTER SPOOL

          (A) NOMINAL FLANGE CONNECTION

       (B) NOMINAL HUB CONNECTION

OAL =   MINIMUM LENGTH TO PROVIDE ADEQUATE WORKING CLEARANCE. SPECIFY ADDITIONAL LENGTH IF REQUIRED.

 

    Figure 2.3 D

            HUB X HUB ADAPTER SPOOL

          (A) NOMINAL CONNECTION

          (B) NOMINAL CONNECTION

OAL =   MINIMUM LENGTH TO PROVIDE ADEQUATE WORKING CLEARANCE. SPECIFY ADDITIONAL LENGTH IF REQUIRED.

 

2.4 Spools, Drilling and Diverter

WOODCO USA manufactures Drilling Spools in every size and pressure rating. Larger bore, lower pressure Flanged Drilling Spools have the designation, Diverter Spools. Drilling and Diverter spools usually have the same nominal end connections and the same nominal outlet connections.

WOODCO USA manufactures Drilling Spools with minimum overall height (OAL) and outlet extensions consistent with adequate clearance to accommodate studs, nuts, wrenches, and clamps where applicable. Buyers may specify any combination of end connections and outlet connections as well as overall height and outlet extension.

Refer to the figures on the following page for examples of Drilling Spool configurations:

www.woodcousa.com

    Previous Page           Top of Page            Next Page       

    Table of Contents    

              Home                        Contact Us