Catalog for WOODCO USA Pressure Control Equipment

Page 6 

WOODCO USA presents this catalog to gain your attention and secure your business

Phone: 713-672-9491


Figure 2.1 C    Photo

6BX BLIND FLANGE WITH COUNTERBORE

 

Figure 2.1 D    Photo

6BX TARGET FLANGE, LEAD FILLED

 

Figure 2.1 E    Photo

6B TEST OR GAUGE FLANGE TAPPED THRU CENTER

 

Figure 2.1 F    Photo

6BX TEST OR GAUGE FLANGE TAPPED THRU SIDE


Figure 2.1 G    Photo

6B INSTRUMENT FLANGE
SEE PHOTO FOR STUDDED VERSION

  Figure 2.1 H

6B THREADED FLANGE

  Figure 2.1 I   Photo

WELD NECK FLANGE

CONFIRMATION OF WELD NECK O.D. AND I.D. NEEDED TO ASSURE FIT UP OF MATING MATERIAL.

See Weld Neck dimensions that satisfy API requirements at: www.woodcousa.com.

Figure 2.1 J    Photo

16B OR 16BX BLIND HUB *

* 16B HUBS HAVE SR RING GROOVES,
16BX HUBS HAVE BX RING GROOVES.
(see tables in API SPEC. 16A) 

To identify Hubs or to determine which Clamps fit which specific Hubs see: 4.2 Hub Identification Worksheet.

www.woodcousa.com

Terms of Use and Copyright © 2008 WOODCO USA
    Previous Page           Top of Page            Next Page       

    Table of Contents    

             Home                        Contact Us