|
1.0 General This catalog provides information about the variety of pressure control fittings available from WOODCO USA. It presents equipment by names commonly used and provides illustrations for use as a reference to improve communications and avoid errors. WOODCO USA manufactures products in accordance with API and/or national or international standards. The following figures illustrate unusual designs not specifically mentioned in the various sections of this catalog or API Specifications, but which otherwise meet design requirements. A surprising number of unusual configurations which conform to API specification requirements can bear the API Monogram. WOODCO USA wants this catalog to communicate in a manner that will properly and usefully inform buyers and users of pressure control equipment that WOODCO USA offers high quality, safe, interchangeable equipment that will contribute to their success. WOODCO USA wants to sell these products.
MEETS DESIGN CRITERIA OF
API 6A, MAY BEAR THE API |
|
Figure 1.1 B |
|||||||||||
|
|
FLANGE X HUB OUTLET |
||||||||||||
|
CONNECTION |
|
FLANGE END |
|||||||||||
|
MEETS DESIGN CRITERIA OF API 6A. THIS PRODUCT MAY BEAR THE API MONOGRAM. |
|||||||||||||
|
Figure 1.1 C WELD NECK FLANGE |
|||||||||||||
|
|
|
||||||||||||
|
FLANGES WITH WELD NECKS THAT CONFORM TO API |
|||||||||||||
|
Figure 1.1 D |
|||||||||||||
|
MEETS DESIGN CRITERIA OF API 6A. THIS PRODUCT MAY BEAR THE API MONOGRAM. |
FLANGE X HUB |
STUDDED |
|||||||||||
|
FLANGE END |
|||||||||||||
| www.woodcousa.com | |||||||||||||