Catalog for WOODCO USA Pressure Control Equipment

Page 17 

WOODCO USA presents this catalog to gain your attention and secure your business

Phone: 713-672-9491

2.8 Test Rack Flanges and BOP Test Stumps

WOODCO USA offers a wide variety of test flanges and Blow Out Preventer (BOP) test stumps suitable for manufacturers test facilities or drillers testing operations. Loose test flanges may have multiple test port locations for pump-in and bleed-off as well as safety hoist rings to facilitate handling and mounting.

A BOP test stump may have base plates, side and bottom ports, and fixed or removable test mandrel retaining threads.

Test flanges or test stumps usually incorporate customer specified design requirements to meet customer specific needs. The following figures illustrate typical customer requested configurations for test flanges and test stumps.
Figure 2.8 A
TEST FLANGE FOR TOP OR END CLOSURE WITH 2 TEST PORTS AND 4 LIFTING TAPS
SIDE CUT-AWAY VIEW
 
RING GROVE FACE VIEW
     

Figure 2.8 B      Photo
BOP TEST STUMP ON BASE PLATE WITH TEST PORTS AND DRAIN PORT AND FIXED MANDREL RETAINING THREADS
SIDE CUT-AWAY VIEW
 
ISOMETRIC TOP VIEW
Figure 2.8 C
BOP TEST STUMP ON BASE PLATE WITH TEST PORT AND DRAIN PORT AND CHANGEABLE MANDREL RETAINING THREADS
SIDE CUT-AWAY VIEW
 
   

ISOMETRIC TOP VIEW
   www.woodcousa.com
    Previous Page           Top of Page            Next Page       

    Table of Contents    

              Home                        Contact Us