2.6.3 Crosses and Tees, Hub

WOODCO USA manufactures Hub Connection Crosses and Tees in configurations identical to Flange Crosses and Tees. WOODCO USA has established dimensions for face-to-centerlines of all sizes of Hub Crosses and Tees. Clamp Hub Connection configurations shall conform to API Spec 16A. See the WOODCO USA Catalog For Clamps, for information about Clamps.

See the Slide Rule  for WOODCO USA Hubbed Cross, Tee, and Elbow dimensions at: www.woodcousa.com.

Figure 2.6.3 A    Photo

HUB TEE       
    

   HUB CROSS

2.7 Manifold Equipment   

WOODCO USA can supply a large variety of specialized Manifold Fittings. The following list with illustrations, provides a sampling of this "made to order" equipment:

Weld Neck: Crosses, Tees, and Elbows

Flange X Weld Neck Fittings
(other than Weld Neck Flanges and Weld Neck Hubs, illustrated in Section 2.1 of this Catalog)

Transmitter Flanges

Transmitter Manifolds 

Manifold Buffers

Refer to the figures on the following two pages for examples of Manifold Equipment: