Catalog for WOODCO USA Pressure Control Equipment

Page 13 

WOODCO USA presents this catalog to gain your attention and secure your business

Phone: 713-672-9491


Figure 2.6.1 D

STUDDED TEE, 4 WAY (2 OUTLETS)

(A) RUN FACE
NOMINAL CONNECTION		 (B) RUN FACE
NOMINAL CONNECTION
(C) OUTLET FACE
NOMINAL CONNECTION		 (S) OUTLET FACE
NOMINAL CONNECTION*
* S MEANS SPECIAL CONFIGURATION.

See the Slide Rule for Studded Cross, Tee, and Elbow Dimensions at: www.woodcousa.com.

2.6.2 Crosses and Tees, Flange  

WOODCO USA manufactures Flange Crosses and Tees according to the design requirements and face to centerline requirements of API Spec 6A. When specific nominal sizes and combinations of nominal sizes do not appear in API Spec 6A, WOODCO USA shall manufacture Flange Crosses and Tees according to the design criteria provided in API Spec 6A.

Refer to the figures on the right for examples of Flange Cross and Tee configurations:
Figure 2.6.2 A

FLANGE CROSS

(A) RUN FLANGE
NOMINAL CONNECTION		 (B) RUN FLANGE
NOMINAL CONNECTION
(C) OUTLET FLANGE
NOMINAL CONNECTION		 (D) OUTLET FLANGE
NOMINAL CONNECTION

See the Slide Rule for Flanged Cross, Tee, and Elbow Dimensions at: www.woodcousa.com

                Figure 2.6.2 B      Photo

FLANGE TEE
     

(A) RUN FLANGE
NOMINAL CONNECTION		 (B) RUN FLANGE
NOMINAL CONNECTION
(C) OUTLET FLANGE
NOMINAL CONNECTION
   www.woodcousa.com
Terms of Use and Copyright © 2008 WOODCO USA
    Previous Page           Top of Page            Next Page       

    Table of Contents    

              Home                        Contact Us