ABOUT FLANGES

 

Look to www.woodcousa.com as "The Source."

Revised: 07/17/2012

Provided links give access to illustrations and/or additional information.  To return to this page use your browser back button.

Segmented Dual Completion Flanges
They have one flat side with either 5 or 6 bolt holes.

Click Here: to identify Segmented Flanges and view the available sizes with illustrations and their dimensions.

These flanges, designed for use as integral flanges in/on well head christmas trees that complete two producing zones from a single cased well bore, appear in API Spec 6A, 19th Ed. Earlier editions of API Spec 6A once included designs that allowed triple and quadruple completions, but these Segmented Flanges last appeared in API Spec 6A, 14th Ed. and do not interchange with dual completion flanges. Manufacturers have introduced “Block Valves” for multiple completion well heads and no longer offer Segmented Flanges for triple and quadruple completions.

Segmented Flanges seal with ring gaskets and have a recessed face that may (should) allow face to face make-up. This feature adds stability to the otherwise awkward design of the flange type.

API Spec 6A specifies that use of this flange form requires their use in sets (Pairs). The bodies, integral with the flanges, shall have a rigid connection between them to add structural stability to the assembly.

API Spec 6A specifically states that Segmented Flanges shall not have corrosion resistant ring grooves, and Operators shall not use these flanges in Hydrogen Sulfide Service (HSS). Manufacturers shall not mark these flanges DD, EE, FF, and/or HH.


Email this page to a friend or colleague.
  
  Your Email Address:
  Your Colleague's Email:  
  

 


Information above, and in other parts of this Web Site, may help persons who really seek to know. If you have a question, and you think WOODCO USA may have the capacity to answer it, please use our Contact Us link and give us a chance to help.


WOODCO USA provides Web Site Tools for identification, estimating, and reference only. Do not use this information for manufacturing or inspection. Users of these tools should not use them as a substitute for professional engineering advice.  Anyone making use of the information presented does so at his own risk and assumes any and all liability resulting from such use.

FOR FURTHER INFORMATION, OR TO LEARN MORE ABOUT WOODCO USA PRODUCTS AND SERVICES,

CONTACT:

WOODCO USA
P.O. Box 1261
Houston, Texas 77251-1261
Phone: 713-672-9491
USA and Canada: 1-800-496-6326
Fax:  713-672-8768
www.woodcousa.com
Click here to ask a question or get other information.